Info TV Satelit

News Update Information about Dish Satellite, Biss Key, Tandberg, Power vu, Channel TV Radio, Transponder, Frequency, Digital Receiver/Set Top Box Software Firmware, LNB, and etc

Install Your Satellite Dish the Proper Way

Are you looking for instructions on how to do satellite dish installation to your TV? Then lucky you to end up here. To enjoy watching your favorite TV channels, of course, you would need to get a satellite dishfirst. Rather than paying someone to do it for you, if you know the proper installation, then why not do it by yourself, right?  Here, you will get the complete instructions on how to install your satellite dish and connect it to your TV. 


What to do before you start the installation
The very first thing you need to do before starting the satellite dish installation is to determine where will you put your TV, whether you want to put it on your living room, bedroom, or anywhere you want. This is necessary because if you move it after it is connected, it would surely be troublesome. The next thing you need to do is to find the right location for your satellite dish, could be on the ground or on the roof of your house. When determining the location for your satellite dish, you have to make sure that nothing gets in the way. By that, I mean a power line or a tree. This is to make sure that you will get an excellent signal from your satellite dish. If you are planning to put your satellite dish on the ground, a satellite stand would be necessary to help it stands still. 

The step by step satellite dish installation
If you are purchasing a satellite dish, you would also get two cables to connect it to your TV. Those cables are HDMI cable and coaxial cable. After you have decided where to put your satellite dish, then the last thing you need to do is to connect it to your TV. Just follow these easy steps to finish the installation.
1.     On the back of your satellite dish, you will find a coax input with labeled as “LNB”. Plug your coaxial cable into the LNB and connect it to the back of your satellite receiver labeled as “Sat in”. 
2.     Secondly, get your HDMI cable and then plug it into your satellite output port and connect the other end to your TV.
3.     Lastly, simply turn on your TV and find the satellite button on your TV remote. If all of the cables are properly connected, you will see a signal. If the signal is weak, then you might have to relocate your satellite dish.

Now that your satellite dish installation is all set, you can enjoy watching your favorite TV channel anytime.

Show Comments